Stair Treads

[vc_row][vc_column][vc_column_text]Custom cut treads to give your walkway an appealing look while maintaining longevity. Our stone treads can make for a standout appearance as an alternative to poured steps. Treads are custom cut to quantity and size to match your stair layout. Treads can be cut to a custom thickness depending on your application and condition.[/vc_column_text][vc_single_image image=”955″ img_size=”large”][vc_column_text]Tread height can be 2” thick with a riser veneer, or can be a full height such as 6”. Setting drawings can be made to layout various sizes and deduct joints.[/vc_column_text][vc_column_text]Tread Finish Top Options:[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column width=”3/4″][vc_column_text]

Smooth:  Honed smooth and flat with a matte appearance

[/vc_column_text][/vc_column][vc_column width=”1/4″][vc_single_image image=”1011″ img_size=”50×50″ alignment=”center”][/vc_column][/vc_row][vc_row][vc_column width=”3/4″][vc_column_text]

Bush Hammer: Distressed finish that gives textured appearance

[/vc_column_text][/vc_column][vc_column width=”1/4″][vc_single_image image=”921″ img_size=”50×50″ alignment=”center”][/vc_column][/vc_row][vc_row][vc_column width=”3/4″][vc_column_text]

Water-blast: Distressed finish that gives a natural patina appearance

[/vc_column_text][/vc_column][vc_column width=”1/4″][vc_single_image image=”922″ img_size=”50×50″ alignment=”center”][/vc_column][/vc_row][vc_row][vc_column][vc_column_text]Tread Finish Edge Options:[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column width=”3/4″][vc_column_text]

Smooth:  Honed smooth and flat with a matte appearance

[/vc_column_text][/vc_column][vc_column width=”1/4″][vc_single_image image=”1011″ img_size=”50×50″ alignment=”center”][/vc_column][/vc_row][vc_row][vc_column width=”3/4″][vc_column_text]

Rock-face: Edge is pitched to imitate a bare surface of natural stone

[/vc_column_text][/vc_column][vc_column width=”1/4″][vc_single_image image=”1012″ img_size=”50×50″ alignment=”center”][/vc_column][/vc_row][vc_row][vc_column width=”3/4″][vc_column_text]

Bush Hammer: Distressed finish that gives textured appearance

[/vc_column_text][/vc_column][vc_column width=”1/4″][vc_single_image image=”921″ img_size=”50×50″ alignment=”center”][/vc_column][/vc_row][vc_row][vc_column width=”3/4″][vc_column_text]

Bull-nose Rounded edge that can be machined full or half to eliminate sharpness

[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column width=”3/4″][vc_column_text]

Water-blast: Distressed finish that gives a natural patina appearance

[/vc_column_text][/vc_column][vc_column width=”1/4″][vc_single_image image=”922″ img_size=”50×50″ alignment=”center”][/vc_column][/vc_row][vc_row][vc_column width=”3/4″][vc_column_text]

Profile: Custom mold to fit the thickness of the step

[/vc_column_text][/vc_column][/vc_row]