Fireplaces

[vc_row][vc_column][vc_column_text]Indiana Limestone can be used for a hearth, mantel or full surround.  The indoor and outdoor fireplace designs enhance the beauty of the setting. In addition, it will hold up for years of functionality, bringing home warmth and enjoyment.[/vc_column_text][vc_column_text]Hearth:  The stone in front of the firebox opening that extends into the room.  Indiana Limestone can be used for this at the floor or at a raised section.  Can be cut straight or have a bowed front edge.[/vc_column_text][vc_column_text]Mantel:  The stone that is a shelf above the fireplace opening.  Can be cut straight or have a bowed front edge.[/vc_column_text][vc_column_text]Bracket:  The stone can be cut into brackets for support and ornamental aesthetics below the mantel.[/vc_column_text][vc_column_text]Surrounds:  Indiana Limestone can be used to trim around the firebox the same way you would trim around a door.  It would consist of 2 legs and a header piece.  Unlike cast stone kits where a thin filler piece is needed, we custom cut the fireplace surrounds to the exact firebox opening dimensions.[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column width=”1/2″][vc_single_image image=”723″ img_size=”500×500″][/vc_column][vc_column width=”1/2″][vc_single_image image=”976″ img_size=”500×500″][/vc_column][/vc_row][vc_row][vc_column][vc_column_text]The top finish of both the hearth and mantel is smooth on the majority of furnaces.[/vc_column_text][vc_column_text]Furnace Edge Finish Options:[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column width=”3/4″][vc_column_text]Profile: Custom mold to fit the thickness of the hearth or mantel[/vc_column_text][/vc_column][vc_column width=”1/4″][/vc_column][/vc_row][vc_row][vc_column width=”3/4″][vc_column_text]Bullnose: Rounded edge that can be machined full or half bullnose to eliminate sharpness[/vc_column_text][/vc_column][vc_column width=”1/4″][/vc_column][/vc_row][vc_row][vc_column width=”3/4″][vc_column_text]Rockface: Edge is pitched to imitate a bare surface of natural stone[/vc_column_text][/vc_column][vc_column width=”1/4″][vc_single_image image=”1012″ img_size=”50×50″ alignment=”center”][/vc_column][/vc_row][vc_row][vc_column width=”3/4″][vc_column_text]Flat:  Honed flat and consistent[/vc_column_text][/vc_column][vc_column width=”1/4″][/vc_column][/vc_row][vc_row][vc_column][vc_column_text]Furnace Face Finish Options:[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column width=”3/4″][vc_column_text]Profile:  Custom mold to fit the width of the legs and header.  The header profile returns down to meet the leg pieces.  Miter cuts are not utilized[/vc_column_text][/vc_column][vc_column width=”1/4″][/vc_column][/vc_row][vc_row][vc_column width=”3/4″][vc_column_text]Rockface: Edge is pitched to imitate a bare surface of natural stone[/vc_column_text][/vc_column][vc_column width=”1/4″][vc_single_image image=”1012″ img_size=”50×50″ alignment=”center”][/vc_column][/vc_row][vc_row][vc_column width=”3/4″][vc_column_text]Flat:  Honed flat and consistent[/vc_column_text][/vc_column][vc_column width=”1/4″][/vc_column][/vc_row]